essaygenerator.net

Barleycorn Engineering

Display: List / Grid
Show:
Sort By:
Universal Rear Set Controls - Pair
Pair of Universal Rear Sets - Lightened and polished Standard pair have fixed footrests click..
£170.00
Based on 1 reviews.
4 screws at bottom of fork leg +nuts
4 screws at bottom of fork leg +nuts pt nos 4x 15-7354 , 4x 2-923 ,4x 2-1616 ..
£10.00
Based on 1 reviews.
4 screws halfway up fork leg +nuts
4 screws halfway up fork leg +nuts pt nos 2x 65-6054 , 2x  3-1156, 4x 2-49 + washers ..
£10.00
Based on 1 reviews.
Universal Rear Set Controls - Single (please state left or right hand -see below)
Individual Rear Set Control If you are using a reversed gear lever, use this for the brake si..
£85.00
6  hex screws for front mudguard  +nuts
6 hex screws onto blade +nuts pt nos 6x 2-204 6x 2-2395 ..
£8.00
6  slot head screws for front guard +nyloc nuts
6 slot head screws onto blade + nyloc nuts These are actually 6mm but look identical to screw..
£6.00
front spindle (for 7" brake) 65-5929
front spindle suitable for 7" brake front hub Goldie Scrambler and some B31 and A10 earlier m..
£28.00
front spindle 67-5566
front spindle suitable for both 8" half width and 190mm front hubs pt no 67-5566 ..
£33.00
Based on 2 reviews.
front spindle split clamp suitable for 7" brake front hub Goldie Scrambler and some B31 and A..
£10.00
Individual Folding Footrest
The individual folding footrest is used typically where a reversed gear lever is in use. Most..
£28.00
Clip ons - Cafe Racer Style Stainless
Clip ons - Café Racer Style Stainless Parts Standard Size 35mm (Norton) (also available in ot..
£80.00
front spindle clamp bolt  65-5295
front spindle clamp bolt small head pt no. 65-5295 ..
£3.00
Based on 1 reviews.
Gold Star Clip-ons 42-4970 & 42-4972
Polished Stainless Steel clip-on for Gold Star BSAs.   Welded on lever mount. Does not i..
£100.00
Individual  Footrest
Just the plain footrest, as used with the rearset controls and folding footrests. Typically t..
£12.00
Pair of Folding Footrests
Primarily for use as pillion pegs ..
£50.00
Powered By Profile Websites
Barleycorn Engineering © 2017